dmesg - 2005-01-01 02:02

Return To 2005-01-01 02:02 System Information

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-39squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 9 20:49:59 UTC 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[    0.000000]  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000cc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000fbf70000 (usable)
[    0.000000]  BIOS-e820: 00000000fbf70000 - 00000000fbf7b000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fbf7b000 - 00000000fbf80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fbf80000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000204000000 (usable)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x204000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CAFFF write-protect
[    0.000000]   CB000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FE00000000 write-back
[    0.000000]   1 base 0200000000 mask FFFC000000 write-back
[    0.000000]   2 base 00FC000000 mask FFFC000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000fc000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xfbf70 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000fbf70000
[    0.000000]  0000000000 - 00fbe00000 page 2M
[    0.000000]  00fbe00000 - 00fbf70000 page 4k
[    0.000000] kernel direct mapping tables up to fbf70000 @ 8000-e000
[    0.000000] init_memory_mapping: 0000000100000000-0000000204000000
[    0.000000]  0100000000 - 0204000000 page 2M
[    0.000000] kernel direct mapping tables up to 204000000 @ c000-16000
[    0.000000] RAMDISK: 3771d000 - 37fef8ff
[    0.000000] ACPI: RSDP 00000000000f76d0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000fbf78c74 00044 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000fbf7adf2 000F4 (v03 AMD    HAMMER   06040000 PTEC 000F4240)
[    0.000000] ACPI: DSDT 00000000fbf78cb8 020C6 (v01 AMD-K8  AMDACPI 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000fbf7bfc0 00040
[    0.000000] ACPI: HPET 00000000fbf7aee6 00038 (v01 AMD    HAMMER   06040000 PTEC 00000000)
[    0.000000] ACPI: APIC 00000000fbf7af1e 00092 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: SPCR 00000000fbf7afb0 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000204000000
[    0.000000] Skipping disabled node 1
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] found SMP MP-table at [ffff8800000f7750] f7750
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000204000000
[    0.000000]   NODE_DATA [0000000000011000 - 0000000000018fff]
[    0.000000]   bootmap [0000000000019000 -  00000000000597ff] pages 41
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0204000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001686594]    TEXT DATA BSS ==> [0001000000 - 0001686594]
[    0.000000]   #3 [003771d000 - 0037fef8ff]          RAMDISK ==> [003771d000 - 0037fef8ff]
[    0.000000]   #4 [000009b400 - 0000100000]    BIOS reserved ==> [000009b400 - 0000100000]
[    0.000000]   #5 [0001687000 - 00016870b4]              BRK ==> [0001687000 - 00016870b4]
[    0.000000]   #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
[    0.000000]   #7 [000000c000 - 0000011000]          PGTABLE ==> [000000c000 - 0000011000]
[    0.000000] found SMP MP-table at [ffff8800000f7750] f7750
[    0.000000]  [ffffea0000000000-ffffea00071fffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00204000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000fbf70
[    0.000000]     0: 0x00100000 -> 0x00204000
[    0.000000] On node 0 totalpages: 2096907
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 112 pages reserved
[    0.000000]   DMA zone: 3827 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 1013672 pages, LIFO batch:31
[    0.000000]   Normal zone: 14560 pages used for memmap
[    0.000000]   Normal zone: 1050400 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfc000000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfc000000, GSI 24-27
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfc001000] gsi_base[28])
[    0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfc001000, GSI 28-31
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 32
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
[    0.000000] PM: Registered nosave memory: 00000000000cc000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000fbf70000 - 00000000fbf7b000
[    0.000000] PM: Registered nosave memory: 00000000fbf7b000 - 00000000fbf80000
[    0.000000] PM: Registered nosave memory: 00000000fbf80000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[    0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at fc000000 (gap: fc000000:2c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u524288
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2067899
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[    0.000000] Memory: 8188692k/8454144k available (3082k kernel code, 66516k absent, 198936k reserved, 1873k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:576
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2392.634 MHz processor.
[    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.26 BogoMIPS (lpj=9570536)
[    0.008031] Security Framework initialized
[    0.008037] SELinux:  Disabled at boot.
[    0.012556] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.017801] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.020426] Mount-cache hash table entries: 256
[    0.020601] Initializing cgroup subsys ns
[    0.020604] Initializing cgroup subsys cpuacct
[    0.020608] Initializing cgroup subsys devices
[    0.020610] Initializing cgroup subsys freezer
[    0.020612] Initializing cgroup subsys net_cls
[    0.020638] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.020640] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.020643] CPU 0/0x0 -> Node 0
[    0.020644] tseg: 00fbf80000
[    0.020646] CPU: Physical Processor ID: 0
[    0.020647] CPU: Processor Core ID: 0
[    0.020650] mce: CPU supports 5 MCE banks
[    0.020662] Performance Events: AMD PMU driver.
[    0.020666] ... version:                0
[    0.020668] ... bit width:              48
[    0.020669] ... generic registers:      4
[    0.020671] ... value mask:             0000ffffffffffff
[    0.020672] ... max period:             00007fffffffffff
[    0.020674] ... fixed-purpose events:   0
[    0.020675] ... event mask:             000000000000000f
[    0.021314] ACPI: Core revision 20090903
[    0.024080] Setting APIC routing to flat
[    0.024407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.065909] CPU0: Dual Core AMD Opteron(tm) Processor 280 stepping 02
[    0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.012000] CPU 1/0x1 -> Node 0
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 1
[    0.152040] CPU1: Dual Core AMD Opteron(tm) Processor 280 stepping 02
[    0.152128] Booting processor 2 APIC 0x2 ip 0x6000
[    0.012000] Initializing CPU#2
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.012000] CPU 2/0x2 -> Node 0
[    0.012000] CPU: Physical Processor ID: 1
[    0.012000] CPU: Processor Core ID: 0
[    0.240068] CPU2: Dual Core AMD Opteron(tm) Processor 280 stepping 02
[    0.240144] Booting processor 3 APIC 0x3 ip 0x6000
[    0.012000] Initializing CPU#3
[    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.012000] CPU 3/0x3 -> Node 0
[    0.012000] CPU: Physical Processor ID: 1
[    0.012000] CPU: Processor Core ID: 1
[    0.328084] CPU3: Dual Core AMD Opteron(tm) Processor 280 stepping 02
[    0.328096] Brought up 4 CPUs
[    0.328098] Total of 4 processors activated (19140.38 BogoMIPS).
[    0.328864] CPU0 attaching sched-domain:
[    0.328870]  domain 0: span 0-1 level MC
[    0.328872]   groups: group ffff880008c0fbf0 cpus 0 group ffff880008c8fbf0 cpus 1
[    0.328877]   domain 1: span 0-3 level CPU
[    0.328879]    groups: group ffff880008c0fd00 cpus 0-1 (cpu_power = 2048) group ffff880008d0fd00 cpus 2-3 (cpu_power = 2048)
[    0.328888] CPU1 attaching sched-domain:
[    0.328890]  domain 0: span 0-1 level MC
[    0.328892]   groups: group ffff880008c8fbf0 cpus 1 group ffff880008c0fbf0 cpus 0
[    0.328896]   domain 1: span 0-3 level CPU
[    0.328898]    groups: group ffff880008c0fd00 cpus 0-1 (cpu_power = 2048) group ffff880008d0fd00 cpus 2-3 (cpu_power = 2048)
[    0.328904] CPU2 attaching sched-domain:
[    0.328906]  domain 0: span 2-3 level MC
[    0.328908]   groups: group ffff880008d0fbf0 cpus 2 group ffff880008d8fbf0 cpus 3
[    0.328912]   domain 1: span 0-3 level CPU
[    0.328914]    groups: group ffff880008d0fd00 cpus 2-3 (cpu_power = 2048) group ffff880008c0fd00 cpus 0-1 (cpu_power = 2048)
[    0.328920] CPU3 attaching sched-domain:
[    0.328922]  domain 0: span 2-3 level MC
[    0.328924]   groups: group ffff880008d8fbf0 cpus 3 group ffff880008d0fbf0 cpus 2
[    0.328928]   domain 1: span 0-3 level CPU
[    0.328930]    groups: group ffff880008d0fd00 cpus 2-3 (cpu_power = 2048) group ffff880008c0fd00 cpus 0-1 (cpu_power = 2048)
[    0.329072] devtmpfs: initialized
[    0.332513] regulator: core version 0.5
[    0.332513] NET: Registered protocol family 16
[    0.332513] node 0 link 1: io port [0, ffffff]
[    0.332513] TOM: 00000000fc000000 aka 4032M
[    0.332513] node 0 link 1: mmio [fc000000, fe2fffff]
[    0.332513] node 0 link 1: mmio [fec00000, fec0ffff]
[    0.332513] node 0 link 1: mmio [a0000, bffff]
[    0.332513] node 0 link 1: mmio [fed00000, fed0ffff]
[    0.332513] TOM2: 0000000204000000 aka 8256M
[    0.332513] bus: [00,ff] on node 0 link 1
[    0.332513] bus: 00 index 0 io port: [0, ffff]
[    0.332513] bus: 00 index 1 mmio: [fc000000, febfffff]
[    0.332513] bus: 00 index 2 mmio: [fec00000, fecfffff]
[    0.332513] bus: 00 index 3 mmio: [a0000, bffff]
[    0.332513] bus: 00 index 4 mmio: [fed00000, ffffffff]
[    0.332513] bus: 00 index 5 mmio: [204000000, fcffffffff]
[    0.332513] ACPI: bus type pci registered
[    0.332513] PCI: Using configuration type 1 for base access
[    0.332789] bio: create slab  at 0
[    0.332789] ACPI: EC: Look up EC in DSDT
[    0.333930] ACPI: Interpreter enabled
[    0.333933] ACPI: (supports S0 S1 S4 S5)
[    0.333950] ACPI: Using IOAPIC for interrupt routing
[    0.337534] ACPI: No dock devices found.
[    0.337649] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.337815] pci 0000:00:07.1: reg 20 io port: [0x1020-0x102f]
[    0.337847] pci 0000:00:07.2: reg 10 io port: [0x1000-0x101f]
[    0.337988] pci 0000:00:0a.1: reg 10 64bit mmio: [0xfc000000-0xfc000fff]
[    0.338049] pci 0000:00:0b.1: reg 10 64bit mmio: [0xfc001000-0xfc001fff]
[    0.338220] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
[    0.338274] pci 0000:01:00.1: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
[    0.338355] pci 0000:01:05.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.338362] pci 0000:01:05.0: reg 14 io port: [0x2000-0x20ff]
[    0.338370] pci 0000:01:05.0: reg 18 32bit mmio: [0xfc102000-0xfc102fff]
[    0.338393] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.338413] pci 0000:01:05.0: supports D1 D2
[    0.338455] pci 0000:00:06.0: bridge io port: [0x2000-0x2fff]
[    0.338459] pci 0000:00:06.0: bridge 32bit mmio: [0xfc100000-0xfdffffff]
[    0.338494] pci 0000:02:01.0: reg 10 64bit mmio: [0xfe010000-0xfe01ffff]
[    0.338501] pci 0000:02:01.0: reg 18 64bit mmio: [0xfe000000-0xfe00ffff]
[    0.338524] pci 0000:02:01.0: PME# supported from D3hot D3cold
[    0.338527] pci 0000:02:01.0: PME# disabled
[    0.338559] pci 0000:02:01.1: reg 10 64bit mmio: [0xfe030000-0xfe03ffff]
[    0.338566] pci 0000:02:01.1: reg 18 64bit mmio: [0xfe020000-0xfe02ffff]
[    0.338588] pci 0000:02:01.1: PME# supported from D3hot D3cold
[    0.338591] pci 0000:02:01.1: PME# disabled
[    0.338627] pci 0000:00:0a.0: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
[    0.338677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
[    0.338742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT]
[    0.338789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT]
[    0.344050] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
[    0.344209] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *7
[    0.344342] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 11) *0, disabled.
[    0.344494] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
[    0.344626] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.344629] vgaarb: loaded
[    0.344644] PCI: Using ACPI for IRQ routing
[    0.344644] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.344644] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.344644] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.352040] Switching to clocksource hpet
[    0.353428] pnp: PnP ACPI init
[    0.353461] ACPI: bus type pnp registered
[    0.354570] pnp: PnP ACPI: found 8 devices
[    0.354572] ACPI: ACPI bus type pnp unregistered
[    0.354584] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.354587] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.354590] system 00:00: iomem range 0x100000-0xfbffffff could not be reserved
[    0.354593] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.354596] system 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.354599] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.354602] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
[    0.354609] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.354612] system 00:06: ioport range 0x1100-0x117f has been reserved
[    0.354614] system 00:06: ioport range 0x1180-0x11ff has been reserved
[    0.354617] system 00:06: ioport range 0x300-0x307 has been reserved
[    0.354620] system 00:06: ioport range 0x421-0x42f has been reserved
[    0.354622] system 00:06: ioport range 0xca2-0xca3 has been reserved
[    0.354625] system 00:06: iomem range 0xfff80000-0xffffffff has been reserved
[    0.354628] system 00:06: iomem range 0xff780000-0xff7fffff has been reserved
[    0.354631] system 00:06: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.354634] system 00:06: iomem range 0xc0000-0xc7fff has been reserved
[    0.359572] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[    0.359577] pci 0000:00:06.0:   IO window: 0x2000-0x2fff
[    0.359583] pci 0000:00:06.0:   MEM window: 0xfc100000-0xfdffffff
[    0.359587] pci 0000:00:06.0:   PREFETCH window: 0xfe100000-0xfe1fffff
[    0.359594] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[    0.359596] pci 0000:00:0a.0:   IO window: disabled
[    0.359599] pci 0000:00:0a.0:   MEM window: 0xfe000000-0xfe0fffff
[    0.359602] pci 0000:00:0a.0:   PREFETCH window: disabled
[    0.359606] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[    0.359607] pci 0000:00:0b.0:   IO window: disabled
[    0.359610] pci 0000:00:0b.0:   MEM window: disabled
[    0.359613] pci 0000:00:0b.0:   PREFETCH window: disabled
[    0.359636] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.359638] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.359641] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.359643] pci_bus 0000:01: resource 1 mem: [0xfc100000-0xfdffffff]
[    0.359646] pci_bus 0000:01: resource 2 pref mem [0xfe100000-0xfe1fffff]
[    0.359648] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe0fffff]
[    0.359703] NET: Registered protocol family 2
[    0.360021] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.362949] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.369517] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.370382] TCP: Hash tables configured (established 524288 bind 65536)
[    0.370386] TCP reno registered
[    0.370542] NET: Registered protocol family 1
[    0.370571] pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled
[    0.370575] pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
[    0.370580] pci 0000:00:0a.0: disabled boot interrupts on device [1022:7450]
[    0.370582] pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[    0.370587] pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
[    0.370590] pci 0000:00:0b.0: disabled boot interrupts on device [1022:7450]
[    0.370592] pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[    0.370682] pci 0000:01:05.0: Boot video device
[    0.370778] Unpacking initramfs...
[    0.583714] Freeing initrd memory: 9034k freed
[    0.593342] PCI-DMA: Disabling AGP.
[    0.593508] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.593510] PCI-DMA: using GART IOMMU.
[    0.593516] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.595051] audit: initializing netlink socket (disabled)
[    0.595069] type=2000 audit(1104544537.592:1): initialized
[    0.598443] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.599996] VFS: Disk quotas dquot_6.5.2
[    0.600050] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.600144] msgmni has been set to 16011
[    0.600524] alg: No test for stdrng (krng)
[    0.600589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.600593] io scheduler noop registered
[    0.600594] io scheduler anticipatory registered
[    0.600596] io scheduler deadline registered
[    0.600638] io scheduler cfq registered (default)
[    0.602768] Linux agpgart interface v0.103
[    0.602925] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.603247] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.603386] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.603447] PNP: No PS/2 controller found. Probing ports directly.
[    0.856315] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.856412] mice: PS/2 mouse device common for all mice
[    0.856499] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.856533] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.856545] cpuidle: using governor ladder
[    0.856548] cpuidle: using governor menu
[    0.856553] No iBFT detected.
[    0.856866] TCP cubic registered
[    0.856986] NET: Registered protocol family 10
[    0.857808] Mobile IPv6
[    0.857812] NET: Registered protocol family 17
[    0.857909] PM: Resume from disk failed.
[    0.857921] registered taskstats version 1
[    0.858226] rtc_cmos 00:03: setting system clock to 2005-01-01 01:55:39 UTC (1104544539)
[    0.858280] Initalizing network drop monitor service
[    0.858317] Freeing unused kernel memory: 592k freed
[    0.858749] Write protecting the kernel read-only data: 4220k
[    0.874380] udev[101]: starting version 164
[    0.918143] SCSI subsystem initialized
[    0.931281] usbcore: registered new interface driver usbfs
[    0.931316] usbcore: registered new interface driver hub
[    0.931363] usbcore: registered new device driver usb
[    0.938932] tg3.c:v3.116 (December 3, 2010)
[    0.938950]   alloc irq_desc for 24 on node 0
[    0.938953]   alloc kstat_irqs on node 0
[    0.938963] tg3 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[    0.941323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.956368] libata version 3.00 loaded.
[    0.957633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.957738]   alloc irq_desc for 19 on node 0
[    0.957740]   alloc kstat_irqs on node 0
[    0.957749] ohci_hcd 0000:01:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.957786] ohci_hcd 0000:01:00.0: OHCI Host Controller
[    0.957829] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.957870] ohci_hcd 0000:01:00.0: irq 19, io mem 0xfc100000
[    0.959617] pata_amd 0000:00:07.1: version 0.4.1
[    0.959749] scsi0 : pata_amd
[    0.959876] scsi1 : pata_amd
[    0.959917] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1020 irq 14
[    0.959920] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1028 irq 15
[    0.987172] tg3 0000:02:01.0: eth0: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0c:76:ad:a5:7a
[    0.987176] tg3 0000:02:01.0: eth0: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    0.987179] tg3 0000:02:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
[    0.987181] tg3 0000:02:01.0: eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
[    0.987270]   alloc irq_desc for 25 on node 0
[    0.987271]   alloc kstat_irqs on node 0
[    0.987277] tg3 0000:02:01.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
[    1.036059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.036061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036064] usb usb1: Product: OHCI Host Controller
[    1.036065] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.036067] usb usb1: SerialNumber: 0000:01:00.0
[    1.036150] usb usb1: configuration #1 chosen from 1 choice
[    1.036182] hub 1-0:1.0: USB hub found
[    1.036193] hub 1-0:1.0: 3 ports detected
[    1.036315] ohci_hcd 0000:01:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.036326] ohci_hcd 0000:01:00.1: OHCI Host Controller
[    1.036334] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
[    1.036351] ohci_hcd 0000:01:00.1: irq 19, io mem 0xfc101000
[    1.036966] tg3 0000:02:01.1: eth1: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:0c:76:ad:a5:7b
[    1.036970] tg3 0000:02:01.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    1.036973] tg3 0000:02:01.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.036975] tg3 0000:02:01.1: eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
[    1.094038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.094041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.094043] usb usb2: Product: OHCI Host Controller
[    1.094044] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[    1.094046] usb usb2: SerialNumber: 0000:01:00.1
[    1.094105] usb usb2: configuration #1 chosen from 1 choice
[    1.094133] hub 2-0:1.0: USB hub found
[    1.094143] hub 2-0:1.0: 3 ports detected
[    1.173801] ata1.01: ATA-7: MAXTOR STM3120814A, 3.AAJ, max UDMA/100
[    1.173806] ata1.01: 234441648 sectors, multi 16: LBA48 
[    1.240522] ata1.01: configured for UDMA/100
[    1.240754] scsi 0:0:1:0: Direct-Access     ATA      MAXTOR STM312081 3.AA PQ: 0 ANSI: 5
[    1.421376] ata2.00: ATAPI: SR-C8102, 1A11, max MWDMA2
[    1.436297] ata2.00: configured for MWDMA2
[    1.442153] scsi 1:0:0:0: CD-ROM            TOSHIBA  CD-R/RW SR-C8102 1A11 PQ: 0 ANSI: 5
[    1.451405] sd 0:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.451455] sd 0:0:1:0: [sda] Write Protect is off
[    1.451458] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.451478] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.451623]  sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.461245] Uniform CD-ROM driver Revision: 3.20
[    1.461352] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.472053]  sda1 sda2 sda3
[    1.496106] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.501261] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.501385] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.925252] PM: Starting manual resume from disk
[    1.925256] PM: Resume from partition 8:2
[    1.925258] PM: Checking hibernation image.
[    1.946283] PM: Error -22 checking image file
[    1.946286] PM: Resume from disk failed.
[    2.010930] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.376163] udev[333]: starting version 164
[    3.681377] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    3.757991] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.758055] ACPI: Power Button [PWRB]
[    3.758159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.758187] ACPI: Power Button [PWRF]
[    3.768856] processor LNXCPU:00: registered as cooling_device0
[    3.769046] processor LNXCPU:01: registered as cooling_device1
[    3.769097] processor LNXCPU:02: registered as cooling_device2
[    3.769143] processor LNXCPU:03: registered as cooling_device3
[    4.315982] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.341139] shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
[    4.341143] shpchp 0000:00:06.0: Cannot reserve MMIO region
[    4.341763] shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[    4.341766] shpchp 0000:00:0a.0: Cannot reserve MMIO region
[    4.341970] shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[    4.341972] shpchp 0000:00:0b.0: Cannot reserve MMIO region
[    4.342127] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.345980] AMD768 RNG detected
[    4.434824] EDAC MC: Ver: 2.1.0 Jan  9 2012
[    4.509176] EDAC amd64_edac:  Ver: 3.2.0 Jan  9 2012
[    4.509267] EDAC amd64: ECC is enabled by BIOS.
[    4.509365] EDAC amd64: ECC is enabled by BIOS.
[    4.509444] EDAC MC: Rev E or earlier detected
[    4.509674] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[    4.509677] EDAC MC: Rev E or earlier detected
[    4.509706] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
[    4.509795] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[    5.280636] Adding 7812088k swap on /dev/sda2.  Priority:-1 extents:1 across:7812088k 
[    5.618252] loop: module loaded
[    5.967632] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    6.610489] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.788504] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[    7.788508] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[    7.788510] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[    7.788511] vboxdrv: the usage of hardware performance counters by
[    7.788512] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[    7.789058] vboxdrv: Found 4 processor cores.
[    7.789128] VBoxDrv: dbg - g_abExecMemory=ffffffffa023c6c0
[    7.789245] vboxdrv: fAsync=0 offMin=0x4b0 offMax=0x43e9
[    7.789497] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[    7.789499] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
[    9.082792] tg3 0000:02:01.0: eth0: Link is up at 1000 Mbps, full duplex
[    9.082797] tg3 0000:02:01.0: eth0: Flow control is on for TX and on for RX
[    9.084477] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.093460] lp: driver loaded but no devices found
[    9.119901] ppdev: user-space parallel port driver
[   12.549740] mtrr: type mismatch for fd000000,800000 old: write-back new: write-combining
[   12.587474] mtrr: no MTRR for fd000000,800000 found
[   12.587892] mtrr: type mismatch for fd000000,800000 old: write-back new: write-combining
[   19.789528] eth0: no IPv6 routers present

Return To 2005-01-01 02:02 System Information